Gecko in.ye-5 Control System 0610-300013

Gecko in.ye-5 Control System 0610-300013

After upgrading its little brother, we couldn't resist doing the same with Gecko’s in.ye. With its boosted CPU, external memory and higher-capacity relays, in.ye-V3 now has the power it needs to make the most of new features like LED lights for troubleshooting clues.

Light up your hot tub with an output capacity increased to 1.3A and the integration of the in.mix 300 color system on the main board. The new in.lu.me cables and LED lights can be connected directly to the in.ye-V3 box with full color control directly from the keypad.

With its new terminal block, onboard AMP connectors and an evolved cable-strain relief system, it has never been easier to connect your accessories to a control box! We’ve also added a pathway to connected accessories with faster communication.

The in.touch 3 WiFi Module alls you to control your spa from anywhere. Check and adjust the water temperature, turn on and off the pumps and lights and more.

The in.ye-5 Control System Can Operate:

• (1) 4.0 kW Heater Assembly
• (2) Single or Two Speed Pump 120 Volt or 240 Volt
  
• (1) Blower or Circulation Pump or Ozonator
  
• (1) Ozonator
• (1) Spa Light

Features:

• in.ye-5 Control System
• AMP connectors for outputs now easier to connect
• New diagnostic LEDs
• in.touch 3 WiFi
• heat.wav heater
• in.claw - new watertight strain relief system
• Enough outputsfor all spa needs
• CO - Communication connectors
• Each output voltage can be configured 120/240 volt
• Push notifications can alert users even when the app isn't open
• Easily manage your spa from the Gecko App
• Allows you to control your temperature, pumps, blower and lights
• Networks through your networks ethernet connection

Specifications:

• Voltage: 120/240
• UL/CSA Standards Listing: UL 1563 Sixth Edition and CAN/CSA C22.2 No. 218.1-13
• Heatwave Heater Voltage: Voltage: 120 or 240 Volt, 60 Hz / Wattage: 5,5 kW at 240 Volt, / 4 kW at 240 V or 1 kW at 120 Volt
• Flow rate: Minimum of 18 GPM (68 LPM) is required

System Includes:

• Spack Pack : in.ye-5
• Keypad: in.k450-3OP
• Cables: 2 Dual Speed Amp Cables, 2 Single Speed Amp Cables
• Light
• Adaptor Plate for Control Panel

Note:

• Hot Tub Control Systems are intentended to be installed by a professional spa or hot tub technician. The control systems need to be configured based on the equipment your spa is using and are not plug and play.

Gecko 0610-300013